Elastix Project
Main | My View | View Issues | Change Log | Roadmap | Docs
  

Viewing Issue Simple Details [ Jump to Notes ] [ View Advanced ] [ Issue History ] [ Print ]
ID Category Severity Reproducibility Date Submitted Last Update
0000273 [Elastix distro] PBX (Asterisk) minor always 2010-03-08 20:37 2010-04-05 12:48
Reporter garysiu View Status public  
Assigned To a_villacis
Priority normal Resolution duplicate  
Status resolved   Product Version
Summary 0000273: AX1600 Card problem in Elastix-2.0.0-beta1-i386-bin-20Jan2010
Description The problem is circuit board busy even the phone line is ready after the PBX reboot.
Then release phone line and put in again it is working.
I think the PBX have not automatic to detect the phone line after reboot, need manual to release phone line and put in again it can detected. Then cab dial out.
Each time I need to manual do this, after PBX reboot.
Additional Information
Tags No tags attached.
Elastix version
Attached Files

- Relationships
duplicate of 0000289resolveda_villacis asterisk 1.6.2: no outgoing FXO until an incoming call 

-  Notes
(0001075)
bmacias (administrator)
2010-03-22 18:36

 Please, probe elastix 2.0.0 beta2. And update freePBX

yum update freePBX
(0001080)
garysiu (reporter)
2010-03-22 20:15

 Good, I will try, but no elastix 2.0.0 beta2 download available. where can get it.

Thanks
Gary Siu
(0001083)
bmacias (administrator)
2010-03-23 11:22

 Iso 32bits

http://sourceforge.net/projects/elastix/files/Elastix-2.0.0-beta2-i386-bin-19Mar2010.iso/download [^]


Iso 64bits

http://sourceforge.net/projects/elastix/files/Elastix-2.0.0-beta2-x86_64-bin-19mar2010.iso/download [^]
(0001099)
garysiu (reporter)
2010-03-25 03:26

 I had installed Elastix 2.0 beta2 and yum update then reboot and test ATCOM1600 again. But the problem still not solve.
The problem is all circuit board busy, when I dial out after reboot PBX. I need to remove the phone line and put in again then it is working each time after reboot.

But I used same ATCOM1600 in Elastix 1.6 is no all circuit board busy problem, but have another problem is it can dial even no phone line connected.
(0001145)
a_villacis (developer)
2010-04-01 19:39

 Confirmed. Bug reproducible as follows:
- boot PBX with all cables connected to card
- on attempt to dial out from PBX with card, failure happens:
NoOp("SIP/412-00000003", "Dial failed for some reason with DIALSTATUS = CHANUNAVAIL and HANGUPCAUSE = 0")
NoOp("SIP/412-00000003", "TRUNK Dial failed due to CHANUNAVAIL HANGUPCAUSE: 0 - failing through to other trunks") in new stack
- Workaround (confirmed) is to physically remove cable from card, then plug it again. Then calls can be dialed out.

All this was confirmed with a FXO module.
(0001146)
a_villacis (developer)
2010-04-01 19:40

 Might be related to bug 0000289.
(0001147)
a_villacis (developer)
2010-04-05 12:48

 The patch that fixes bug 0000289 happens to fix this bug too, therefore showing that this is actually a dupe.

- Issue History
Date Modified Username Field Change
2010-03-08 20:37 garysiu New Issue
2010-03-22 18:36 bmacias Note Added: 0001075
2010-03-22 18:37 bmacias Assigned To => bmacias
2010-03-22 18:37 bmacias Status new => feedback
2010-03-22 20:15 garysiu Note Added: 0001080
2010-03-23 11:22 bmacias Note Added: 0001083
2010-03-25 03:26 garysiu Note Added: 0001099
2010-03-25 11:08 bmacias Assigned To bmacias => a_villacis
2010-04-01 19:39 a_villacis Note Added: 0001145
2010-04-01 19:39 a_villacis Status feedback => confirmed
2010-04-01 19:40 a_villacis Note Added: 0001146
2010-04-05 12:48 a_villacis Note Added: 0001147
2010-04-05 12:48 a_villacis Relationship added duplicate of 0000289
2010-04-05 12:48 a_villacis Duplicate ID 0 => 289
2010-04-05 12:48 a_villacis Status confirmed => resolved
2010-04-05 12:48 a_villacis Resolution open => duplicate

Mantis 1.1.6[^]
Copyright © 2000 - 2008 Mantis Group
Powered by Mantis Bugtracker